Melody Generator using IC UM66 Circuit Schematic With Explnation



Here is the simplest melody generator circuit you can make using an IC.The UM66 series are CMOS IC’s designed for using in calling bell, phone and toys. It has a built in ROM programmed for playing music. The device has very low power consumption.Thanks for the CMOS technology.The melody will be available at pin3 of UM66 and here it is amplified by using Q1 to drive the speaker.Resistor R1 limits the base current of Q1 within the safe values.Capacitor C1 is meant for noise suppression.






http://www.circuitstoday.com/wp-content/uploads/2008/02/melody.JPG




http://www.circuitstoday.com/wp-content/uploads/2008/02/um66.JPG



Notes

* Power supply must be between 1.5V & 4.5V .Do not exceed 4.5 V.
* Speaker can be driven with external NPN transistor.
* Melody begins from the first note if power is reseted.
* Assemble the circuit on a good quality common board.
* If transistor HE8050S is not available use any NPN transistor like BC548 or 2N2222.


EmoticonEmoticon

Advertisement